Horn connector "Horn connector" is a type of plastic connector with two ear buckles, similar to the two horns of a cow.

This connector is widely used in electronic, electrical, instrument in the PCB circuit board, its role is in the circuit is blocked or isolated between the circuit, play a bridge function, take up the task of current or signal transmission.

Usually used with the busbar form a board-to-board connection; Or with the electronic wiring harness terminal matching the use of the board pair wire connection.

"Horns come in a variety of sizes as different products require different sizes."
High temperature resistant insulating plastic (UL94V-0) material: PBT(only meet the wave soldering process).

High temperature resistant insulating plastic (UL94V-0) material: PA6T, PA9T, LCP(can meet the wave soldering, reflow welding two kinds of process).

The color of insulating plastic can be divided into black, white, blue, natural color and so on.

Policy material: Brass (H65)

Hardware plug contact terminal surface treatment: first plated with nickel in gold or silver, bright tin, wuxi, semi-gold tin etc.
SPECIFICATIONS >>>

Current Rating:1.0Amps

Withstanding Voltage:AC 500Vmin/Minute

Insulation Resistance:1000MΩ Min

Contact Resistance:20 mΩ MAX

Operation Temperature:-40℃to+105℃

Material>>>

Plastic material:PA6T/PA9T/LCP+30%G.F

Color:Black,White,blue,Special

Insrlator Material:Polyester(UL94V-0)

Contact Material:Brass

Contact Plating:Au Or Sn over 40u" Ni

Max.Processing Temp: 230°C for 30-60 seconds

(260°C for 10 seconds)

Platsic material	PA6T/PA9T/LCP+30%G.F
Color	black
Insrlator material	POLYESTER(UL94V-0)
Contact material	brass
Contact plating	AU OR SN OVER NI
Current rating	3.0Amps
Withstanding Voltage	AC/DC500Vmin/Minute
Insulation Resistance	1000MΩ Min
Contact Resistance	20mΩ MAX
Operation Temperature	-40℃+105℃

Inquiry Cart 0